Fiber Channel Hyper-V Server Configuration? | Site Feedback

Mixed Mindz

http://edge.technet.com/Media/Hyper-V-Server-2008-R2-Bare-Metal-to-Live-Migration-In-about-an-hour/?wa=wsignin1.0

Matt, a great HowTo!

Thank you.

But as with every how to, my environment is always a little different.

I have a Qlogic FiberChannel HBAs on my Dell 1955 Blade Servers.

With a Hitachi AMS500 array. (I hope this will work, anyone tried?)

In your presentation you go over turning on and configuring iSCSI.

I am frustratingly new to working by command line.

and I noticed your 'iscsicpl' command is not listed in the standard help.

I then tried fib<tab> hba<tab> etc with no luck... (hey, I'm allowed to try)

please point me in the right direction!

I'm excited to test and deploy Hyper-V R2!

-Ryan

mattmcspirit

Hi Ryan,

If you're using Fiber - ignore the iSCSICPL, as you don't need it - you should just be able to see the disks in disk management when you remotely connect (later in the video). You'll probably have to go to your Hitachi software and create your LUNs, and point them at the WW Identifiers for the HBA's, but you'd do all that in Hitachi's S/W.

Hope that helps!

Matt